RSS / Road Sport SupplyTarmac Series Rear Lower Control Arms for 986 / 987 / 981 / 982 / 718, 996 / 997 / 997.2
Application:- 911 GT3 RS 4.0 - 997.2
- 911 GT3 RS - 997.2
- 911 GT3 RS - 997
- More
- 911 GT3 - 997.2
- 911 GT3 - 997
- 911 GT3 - 996
- 911 GT2 RS - 997.2
- 911 GT2 - 997
- 911 GT2 - 996
- 911 Turbo / S - 997.2
- 911 Turbo - 997
- 911 Turbo - 996
- 911 Carrera GTS - 991.2
- 911 Carrera S - 991.2
- 911 Carrera - 991.2
- 911 Carrera GTS - 991
- 911 Carrera S - 991
- 911 Carrera - 991
- 911 Carrera GTS - 997.2
- 911 Carrera - 997.2
- 911 Carrera - 997
- 911 Carrera - 996
- 911 Carrera / S / 4S- 997.2
- Boxster - 986
- Cayman GT4 - 981
- Cayman / Boxster - 981
- Boxster Spyder - 981
- Cayman / Boxster - 987.2
- Cayman / Boxster - 987
- Boxster - 987
- Cayman GT4 / Boxster Spyder -718
Product Description
RSS High Performance Tarmac Series Suspension Components are designed, engineered and manufactured on location here in the USA. RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet aluminum rather than casting results in less impurities in the metal. Completely serviceable – for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing / longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn. Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements. Adjustable suspension geometry – adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings. Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high strength steel alloy spherical bearing found in our control arm monoball kit). Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.
Includes (pair of 2):
- Non-Adjustable/Non-Hydraulic Replacement Thrust Arm Bushings
- 1mm/2mm/3mm/7mm Shims
- Spherical Monoball Ends
- Litronic Bracket
NOTE: 2010+ GT3/RS models have optional brake cooling duct brackets ($85) please select when ordering.
NOTE: 987 and 981 models may require additional Rear Litronic or Torque Vector Sensor Brackets ($50) please select when ordering.
You can see this product installed on cars in our project gallery: